How To Dry Wet Boots With Hot Rocks

Drying wet boots with hot rocks is an old-school method that can be effective if done safely. Here’s a step-by-step guide:

1. Select suitable rocks: Look for smooth rocks that are free of cracks and fissures. Avoid porous rocks like sandstone, as they may retain moisture and could potentially explode when heated.
2. Clean the rocks: Rinse the rocks thoroughly to remove any dirt or debris. Let them dry completely before using them.
3. Heat the rocks: Place the rocks in a fire or heat them over a stove or grill. Make sure to heat them gradually to prevent cracking due to rapid temperature changes. Use tongs or a shovel to handle the rocks to avoid burns.
4. Prepare the boots: Remove any excess water from the boots by shaking them or using a towel. Stuff the boots with newspaper or a cloth to help absorb moisture from the inside.
5. Place the rocks in the boots: Once the rocks are hot enough, carefully place them inside the boots. Make sure they are not too hot to avoid damaging the boots.
6. Allow the rocks to absorb moisture: Leave the rocks inside the boots for about 20-30 minutes, allowing them to absorb the moisture. Check the temperature of the rocks periodically to ensure they are not overheating.
7. Remove the rocks: After the allotted time, carefully remove the rocks from the boots using tongs or a shovel. Be cautious as the rocks may still be hot.
8. Air dry: Once the rocks are removed, allow the boots to air dry completely in a well-ventilated area. Avoid placing them near direct heat sources like a fireplace or heater, as this can damage the boots.
9. Check for dryness: After a few hours, check the boots to ensure they are completely dry before wearing them again.

Remember to exercise caution when handling hot rocks to avoid burns or injury, and always prioritize safety when using any drying method for boots or other gear.

This is a great tip to know when you’re hiking or camping at one of our Kiefer Campgrounds.